Panther Replacement Blade f/Rope Cutter [75-7061]

Replacement Blade for Rope CutterIdeal for boat, camper and home use. Lightweight (1. 5 lbs. ), The handle fits in the palm of your hand with easy finger pull operation. It makes quick clean cuts in all types of synthetic ropes, lines and strapping...

Panther Portable Rope Cutting Gun [75-7060B]

Portable Rope Cutting GunPanther’s portable Rope Cutting Gun is ideal for boat, camper and home use. Lightweight (1.5 lbs), the handle fits in the palm of your hand with easy finger pull operation. It makes quick clean cuts in all types of...

T-H Marine LED Battery Tester [BE-EL-51004-DP]

LED Battery TesterSpecifically for all 12 Volt DC batteries.

Weld Mount AT-388 Dispensing Gun [AT-388]

AT-388 Dispensing GunThe AT-388 Adhesive dispensing gun comes with a 10:1 plunger.For Use With 50mL Cartridges of:AT-880Note: The AT-388 will ONLY work with the AT-880 Polypropylene Adhesive Cartridge.  The AT-880 is a 10:1 mix ratio with a...

Weld Mount AT-85810 Mixing Tips *10-Pack [AT-85810]

AT-85810 Mixing Tips *10-PackIts unique design eliminates any possibility of the cartridge plugging up as the entry is separated.  This prevents cross-contamination of the two parts, keeping the cartridge ends clean and clear for multiple uses...

Digital Yacht NAVDoctor NMEA Network Diagnostic Tool [ZDIGNAVDOC]

NAVDoctor NMEA Network Diagnostic ToolNMEA 2000 networks are used extensively for interfacing marine electronic products. It’s based on a robust Canbusarchitecture, but one bad device, cable or termination can have a detrimental effect on...

T-H Marine Prop Master Prop Stop Propeller Stop [PMPS-1-DP]

Prop Master Prop Stop Propeller StopFeatures:Simple to useSecurely holds prop during changingMakes prop-changing saferBrightly colored for greater visibility (Remember to remove propeller stop before using your boat)WARNING: This product can expose you...

Sea-Dog Multi-Tool w/Knife Blade - 304 Stainless Steel [563151-1]

Multi-Tool with Knife Blade - 304 Stainless SteelThis handy Multi-Tool includes a knife, needle nose pliers, cutters, scissors, various screw drivers, bottle opener, file, and saw. Constructed of corrosion resistant stamped 304 stainless steel. A must...

Sea-Dog Rigging Knife - 304 Stainless Steel [565050-1]

Rigging Knife - 304 Stainless SteelThis handy Rigging Knife includes a sharp blade, Marlin spike, shackle key, screw driver, bottle opener, and a loop to attach a lanyard (not included). Constructed of corrosion resistant 304 stainless steel. A great...

Sea-Dog Plastic Suction Cup Handle [490050-1]

Plastic Suction Cup HandleInjection Molded Nylon/Nitrile-Buna Rubber Portable, dual suction cup handle installs instantly. Mounts in any direction on any non-porous surface. Easily mount and re-mount with no marks or damage to hull. No holes,...

Sea-Dog Emergency Deck Fill Plug [357390-1]

Emergency Deck Fill PlugNitrile-Buna RubberThis Emergency Deck Fill Plug is a must for any vessel. Fits most 1-1/2" hose deck fills in the event you lose your cap. For temporary use only until you can replace your OEM cap. Constructed of fuel resistant...

Sea-Dog Inboard Motor Flush [521550-1]

Inboard Motor FlushMolded Rubber/Aluminum Inboard Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system extending the engine’s service life. Easy-to-use by fitting the rubber cup over the...

Sea-Dog Rectangular Motor Flush [521520-1]

Rectangular Motor FlushMolded PVC/Painted Steel Outboard Rectangular Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system, extending the engine’s service life. Easy-to-use molded PVC cups...

Weld Mount 8040 Acrylic Adhesive w/Plunger [804030]

8040 Acrylic Adhesive with Plunger CANNOT SHIP AIR - UPS GROUND ONLYAT-8040 is a good general purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps and dispense the needed amount of adhesive onto a clean surface...

Sea-Dog Stainless Steel Bottle Opener w/Brushed Finish [588450-1]

Stainless Steel Bottle Opener with Brushed Finish Corrosion resistant investment cast 316 stainless steel bottle opener wall mounts with two #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the...

Sea-Dog Add-A-Snap - White - 2-1/2" [299202W-1]

Add-A-Snap - White - 2-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which...

Sea-Dog Add-A-Snap - White - 1-1/2" [299201W-1]

Add-A-Snap - White - 1-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which...

Sea-Dog Add-A-Snap - Black - 1-1/2" [299201B-1]

Add-A-Snap - Black - 1-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon. WARNING: This product can expose you to chemicals which...

Sea-Dog Canvas Snap Tool [299190-1]

Canvas Snap Tool Canvas Snap Tool includes a die wrench and three removable dies for various snap caps and studs. Great addition to any tool box. Aluminum/steel construction. Not for use with heavy duty stainless canvas snaps. WARNING: This product...

Sea-Dog Motor Flush Ear Muff [521500-1]

Motor Flush Ear Muff Outboard motor flushers quickly flush away salt, sand, minerals and contaminates from your lower unit cooling system extending the engine’s service life. Easy to use molded PVC cups deliver fresh water to flush the...

GROCO Spanner Wrench/Deck Plate Key [SW-2531]

Spanner Wrench/Deck Plate Key Features:Cast bronze with stainless steel pins to fit 1/4" and 5/16" holes. Opens to service deck plates or strainer caps with key holes up to 7" apart. Hangs conveniently near the strainer(s) location...

Seaguard Marine Digital Corrosion Professional Tester w/Silver Silver Chloride Reference Cell (SSC) [SEACORP]

Marine Digital Corrosion Professional Tester with Silver & Silver Chloride Reference Cell (SSC)The corrosion protection system on your boat should be checked at regular intervals. Failure to do so can lead to a costly and time consuming repair...

Whitecap Pro Dual Feed Motor Flusher w/Rectangular Cups [P-2402]

Pro Dual Feed Motor Flusher with Rectangular CupsFeatures:Dual Feed Motor FlusherRectangular Cups Included

Whitecap Universal Motor Flusher w/Rectangular Cups [P-2401]

Universal Motor Flusher with Rectangular CupsFeatures:Universal Motor FlushRectangular Cups Included

Davis Snap Tool Multi-Key [382]

Snap Tool Multi-KeyA deck plate with attitude! HandyUniversalStainless SteelStrongPerfect for:FishingHikingClimbingBoatingBikingCampingSailingTailgatingRV Brochure (pdf)

Attwood Prop Wrench Set - Fits 17/32" to 1-1/4" Prop Nuts [11370-7]

Prop Wrench Set - Fits 17/32" to 1-1/4" Prop NutsMultiple socket sizes for all prop maintenance.Offers multiple sockets to fit from 17/32" to 1-1/4", allowing consumers to service multiple propsBuilt of durable plasticWARNING: This product can expose...

Weld Mount AT-13 - 10:1 Gun Plunger f/AT-6030 Adhesive - Single [8013]

10:1 Gun Plunger for AT-6030 AdhesiveSingle Pack gun plunger for AT-6030 Adhesive

Weld Mount Executive Fastener Kit - No Adhesive [1001008]

Executive Fastener Kit - No AdhesiveThis Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Does NOT Contain Acrylic Adhesive The Weld Mount System Eliminates The...

Weld Mount Executive Adhesive & Fastener Kit w/AT-8040 Adhesive [1001003]

Executive Adhesive & Fastener Kit w/AT-8040 AdhesiveThis Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Contains 1 Tube Of Our AT-8040 No Slide Multi Bonder...

Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 500 [805500B]

AT-5B Large Black Nylon Wire Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's...