Shakespeare 3187 Ratchet Mount Stainless Steel [3187]

3187 Stainless Steel Ratchet MountSimilar in design and appearance to the current 4187 mounts, the 3187 Stainless Steel Ratchet Mount is a versatile, free-standing mount with a four-way ratchet design. It can be used to mount vertical or horizontal...

Vesper External GPS Antenna w/8" Cable f/Cortex M1 [010-13266-10]

External GPS Antenna with 8" Cable for Cortex M1External GPS Antenna for Cortex M1 with 8" (200mm) cable. This multi-constellation GNSS Antenna is designed as an external antenna for the Cortex Hub, WatchMate Vision, or XB series of AIS transponders ...

Whitecap Heavy-Duty Ratchet/Antenna Mount - 316 Stainless Steel [S-1802B]

Heavy-Duty Ratchet/Antenna Mount - 316 Stainless SteelThis heavy-duty mount is the finest available device for supporting antennae.Features:Has standard 1"-14" male threadsIncludes: Loran cable holeRequires: (4) 1/4" fastenersCenter to center hole...

Glomex Automatic Gain Control Amplifier w/Automatic A/B Switch - 12/24VDC - 2 Outputs [50023/14AB]

Automatic Gain Control Amplifier with Automatic A/B Switch - 12/24VDC - 2 OutputsWhen you moor your boat and there is a dock TV antenna, you can easily connect your onboard TV system to the dock TV antenna. When the 50023/14AB amplifier finds the dock...

Digital Yacht Antenna Deck Base f/CX4A Antenna [E179F]

Antenna Deck Base for CX4A AntennaDesigned to mount on horizontal deck and supplied with fixing bolts and gasket.

Majestic Mast Mount Bracket f/UFO X TV Antenna [MJUFOXMMB]

Mast Mount Bracket for UFO X TV AntennaHigh quality, stainless steel bracket specifically designed for the UFO X mast mounting. This pole has been designed mainly for the Majestic UFO when mounting on masts to allow the antenna to be easily fitted...

TACO Backing Plate f/GS-850 GS-950 [BP-850AEY]

Backing Plate for GS-850 & GS-950To provide strength for your Grand Slam 850 and 950 when installed to your T-top, our TACO Grand Slam Backing Plates are the answer. Features:Provides strength to baseMatches existing base hole patternNo...

TACO Wedge Plate f/GS-850 GS-950 [WP-850-950]

Wedge Plate for GS-850 & GS-950In case your T-top has a slight curve, keep the appearance of your Grand Slam 850 Electric VHF Antenna Mount and Grand Slam 950 Electric Anchor & Stern Light clean by mounting them perfectly straight with our...

Shakespeare 20 Cable Kit f/Phase III VHF/AIS Antennas - 2 Screw On PL259S RG-8X Cable w/FME Mini Ends Included [PIII-20-ER]

20' Cable Kit for Phase III VHF/AIS Antennas - 2 Screw On PL259S & RG-8X Cable with FME Mini Ends IncludedEasy Route Accessory - 20' cable kit for Phase III VHF/AIS antenna. 2 screw-on PL-259s and RG8X cable with FME mini-ends included.

Glomex 30M - 99 RG-8X Coax f/Glomeasy VHF Antennas - White [RA350/30FME]

30M - 99' RG-8X Coax for Glomeasy VHF Antennas - WhiteInstallation:Sail BoatPower BoatTechnical Specifications:RG8X low loss coaxial cable for Glomeasy VHF antennas: RA106SLSFME, RA106GRPFME and RA300.Long 30m (99'), has pre-installed FME connectors on...

TACO Grand Slam 850 Electric VHF Antenna Mount [GS-850]

Grand Slam 850 Electric VHF Antenna MountDesigned with safety and innovation in mind, boaters can adjust the position of their VHF antenna with the simple push of a button from the comfort of their helm. The GS-850 is a fully electric unit with hidden...

TACO Grand Slam 800 VHF Antenna Mount [GS-800-1]

Grand Slam 800 VHF Antenna MountThe GS-800 VHF Antenna Mount was created specifically to prevent climbing on the boat gunnel to raise and lower a VHF antenna. Lift and descend the antenna from the safety of the deck from under the top. Its smooth...

Shakespeare 4078-20-ER 20 Extension Cable Kit f/VHF, AIS, CB Antenna w/RG-8x Easy Route FME Mini-End [4078-20-ER]

4078-20-ER 20' Extension Cable Kit for VHF, AIS, CB Antenna with RG-8x & Easy Route FME Mini-EndThe cable that connects your antenna to your radio can make or break signal quality literally. Shakespeare offers a range of coaxial cables tailored to...

Glomex 4-Way Nylon Heavy-Duty Ratchet Mount w/Cable Slot Built-In Coax Cable Feed-Thru 1"-14 Thread [RA115]

4-Way Nylon Heavy-Duty Ratchet Mount with Cable Slot & Built-In Coax Cable Feed-Thru 1"-14 Thread4 way ratchet mount in reinforced nylon UV resistant design with handle for deck or bulkhead. Hole for GPS and feed-thru for coax cable. Usable with...

Glomex FME Male to Male Connector [RA357]

FME Male to Male ConnectorDouble-Male FMEWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov...

Rupp Antenna Clevis [09-1088-23]

Antenna ClevisReplacement antenna clevis manufactured from high strength aluminum and anodized black. Thread size 1" - 14.

Glomex 2-Way Splitter TV - TV or TV - FM [V9147]

2-Way Splitter TV - TV or TV - FM2-Way Splitter for TV - TV or TV - FMFor use with Glomex V9125, V9112 and V9130WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or...

Glomex 150MBPS Wireless N Nano Router/Access Point - 5 Port [ITSW001]

150MBPS Wireless N Nano Router/Access Point - 5 Port5-Port 10/100Mbps Desktop Switch. It provides an easy way to expand your wired network. It can process data at a rate of up to 200Mbps making it an ideal choice for expanding your high performance...

Glomex 150MBPS Wireless N Nano Router/Access Point [ITAP001]

150MBPS Wireless N Nano Router/Access Point150MBPS Wireless N Nano router access point, powered through a micro USB port by an external power adapter or USB connection to a computer. It is designed for use with tablets, smart phones, handheld gaming...

Glomex 2-1/4" Round Grounding Plate [RA206]

2-1/4" Round Grounding PlateEarthen or ground plates are a necessary interface between on board electronic devices and the heat sink: water.Glomex earthen plates are made of golden sintered bronze, that is, they consist of a million...

Glomex 1" Mini Versatile Shaft Base Mount f/weBBoat 4G Plus [ITM001]

1" Mini Versatile Shaft Base Mount for weBBoat® 4G PlusLifetime WarrantyWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more...

Rupp Four-Way Oval Antenna Base Assembly [209-1277-00]

Four-Way Oval Antenna Base AssemblyOval antenna base complete with black anodized clevis (09-1088-23) and forged aluminum fittings. Specifications:Type: MiscBox Dimensions: 2"H x 6"W x 8"L WT: 0.6 lbsUPC: 784703001242

Digital Antenna Extension Cable f/500 Series VHF/AIS Antennas - 20' [C118-20]

Extension Cable f/500 Series VHF/AIS Antennas - 20'An easy solution to extending the cable on Digital Antenna's 500 series VHF and AIS antennas. Simply connect the included double mini-UHF male adapter between the 500 series antenna's mini-UHF female...

Digital Antenna Extension Cable f/500 Series VHF/AIS Antennas - 10' [C118-10]

Extension Cable f/500 Series VHF/AIS Antennas - 10'An easy solution to extending the cable on Digital Antenna's 500 series VHF and AIS antennas. Simply connect the included double mini-UHF male adapter between the 500 series antenna's mini-UHF female...

Edson 7" Stainless Antenna Standoff - Antennas Up To 1.5" Diameter [535-7-125]

Edson 7" Stainless Antenna Standoff - Antennas Up To 1.5" DiameterThese strong and attractive standoffs will limit the amount of wear and tear on your antennas while powering through rough seas. Made from investment cast 316 stainless, they will never...

Icom Antenna Connector Adapter [AD92SMA]

Antenna Connector AdapterAdapter to connect a BNC-type antennaFor use with M73 & M88 Specifications:Type: MiscBox Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbsUPC: 4909723706205

Rupp 2-Piece Antenna Collar f/1.5" Antennas [09-1258-2PC]

2-Piece Antenna Collar f/1.5" AntennasReplace your Rupp antenna collar without removing your antenna! Made of high-impact Delrin, these 2-piece clamp-on antenna collars are perfect for new or existing installations. Only available for antennas with a...

Rupp Threaded Antenna Support w/6" Flat Mount, Oval 4-Way Base & 1.5" Collar [PAK-0006]

Threaded Antenna Support w/6" Flat Mount, Oval 4-Way Base & 1.5" CollarA perfect blend of form and function, Antenna Mounting Systems by Rupp combine good looks with innovative designs. Our locking collar holds the antenna securely, yet unlocks...

Rupp Threaded Antenna Support w/6" Pipe Mount, Oval 4-Way Base & 1.5" Collar [PAK-0005]

Threaded Antenna Support w/6" Pipe Mount, Oval 4-Way Base & 1.5" CollarA perfect blend of form and function, Antenna Mounting Systems by Rupp combine good looks with innovative designs. Our locking collar holds the antenna securely, yet unlocks...

Rupp Standard Antenna Mount Support w/4-Way Base, Spacer & 1.5" Collar [PAK-0002]

Standard Support w/4-Way Base w/Spacer & 1.5" CollarA perfect blend of form and function, Antenna Mounting Systems by Rupp combine good looks with innovative designs. The locking collar holds antenna securely, yet unlocks conveniently for lowering. Made...