RIGID Industries Adapt XE Wire Harness [300428]

Adapt XE Wire HarnessThe custom 70"(1.77M) wiring harness is specifically designed to connect RIGIDs Adapt XE  Extreme Enduro LED Moto Kit and switch to your bike's electrical system.It features battery terminals on one end and bullet connectors on...

RIGID Industries Adapt XE XP Magnetic Reed Switch Power Clip [300427]

Adapt XE & XP Magnetic Reed Switch Power ClipThe RIGID Adapt XE Magnetic Reed power clip is used for additional power customization.  Leaving the switch in place limits the light to consuming a maximum of 2.7 amps.  When the switch is...

RIGID Industries Adapt XE Mounting Bracket [300422]

Adapt XE Mounting BracketSpecifically designed to be used as the mount for RIGID's Adapt XE Extreme Enduro LED Moto Kit.*Sold as an Individual. Specifications:Type: Mounting BracketsBox Dimensions: 3"H x 6"W x 9"L WT: 1.1 lbsUPC:...

RIGID Industries Adapt XE Light Cover - Clear [300421]

Adapt XE Light Cover - ClearRIGID light covers add style and function to any bike. Protect your investment with an easy to snap on light cover made from durable polycarbonate plastic.  Adapt XE covers are perfect for areas that require covers on...

RIGID Industries Adapt XE Number Plate - White [300419]

Adapt XE Number Plate - WhiteThe RIGID Adapt XE Number Plate is a universal fit for the Adapt XE Extreme Enduro LED Moto Kit.Made of durable polypropylene, this number plate is easy to snap on and off, and a custom graphics template is included...

Shadow-Caster 3-Position On/Off/Momentary Marine LED Lighting Switch [SCM-SWITCH-O/O/M]

3-Position On/Off/Momentary Marine LED Lighting SwitchOn / Off / Momentary Marine LED Lighting Switch for two-color and multi-color lighting – simply toggle power to set color choice. For use with fishing boats, pontoon boats, sports boats, and...

Shadow-Caster Ethernet Communications Bridge Multi-Zone Controller Kit [SCM-MFD-LC-KIT]

Ethernet Communications Bridge & Multi-Zone Controller KitThe Shadow-Caster MFD ( Multi-Function Display) Lighting Controller gives you full control of up to 6 independent zones of lighting on your vessel using your touchscreen MFD. Easily switch...

RIGID Industries Chase Lightbar - Surface Mount Kit [46599]

Industries Chase Lightbar - Surface Mount KitRIGID Chase 28-inch LED Light Bar mounts feature UV and abrasion resistant polyester powder coat.  The Surface mount is made from cast aluminum and fits 1.75 to 2-inch tubes.  The horizontal surface...

RIGID Industries Chase Lightbar - Tube Mount Kit [46598]

Chase Lightbar - Tube Mount KitRIGID Chase 28-inch LED Light Bar mounts feature UV and abrasion resistant polyester powder coat.  The Surface mount is made from cast aluminum and fits 1.75 to 2-inch tubes.  The horizontal surface mount kit is...

ACR URP-102 Point Pad Kit f/RCL-50/100 - 2nd Station Kit - Flush/Surface Mount Options [9282.3]

URP-102 Point Pad Kit f/RCL-50/100 - 2nd Station Kit - Flush/Surface Mount OptionsThe URP-102 Point Pad™ Kit, for RCL-50 / -100/ Series (2ndary station, includes 2-way Splitter, 4-ea. F-Connectors, 15’ Coaxial) Not Compatible with URC-100 ...

Lumitec Capri3 Retrofit Kit - White [101731]

Capri3 Retrofit Kit - WhiteWant to upgrade your current Capri lights to the all-new Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require...

OceanLED OceanDMX RC Explore XFM Colours 915MHz [013016]

OceanDMX RC Explore XFM Colours 915MHzThe OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable...

Lunasea Tri/Anchor/Flash Fixture Switch [LLB-53SW-81-00]

Tri/Anchor/Flash Fixture SwitchConvenient Switch for Tri Color Nav Fixture. Conveniently shows what the Tri Color Fixture mode is in. Easy to hook up with push connectors.Features:Visual LED indicatorsSolid Metal PlateEasy Connect push...

Hydro Glow S1W Ultra Thin Solar Light - Blue [S1B]

S1W Ultra Thin Solar Light - BlueProven Hurricane Tough!Specifications:Body Material: High Impact PolycarbonatePower Supply: High Efficient Solar Panel Made in the USABattery: Lithium-Ion 3.7v/340mahLEDs: 6 F3 LEDsColor: BlueVisual Distance: 500MWorking...

Hella Marine NaviLED PRO Deck Mount Adapter - White [241287812]

NaviLED PRO Deck Mount Adapter - WhiteThe NaviLED PRO series of navigation lamps have been the preferred choice of commercial and large recreational vessels for over a decade. The Horizontal Deck Mount Adapter accessory increases the installation...

RIGID Industries D-XL Series Cover - Amber [321933]

D-XL Series Cover - AmberRIGID light covers are the perfect solution for style and function.  Give your vehicle a unique look while also protecting your investment.  These light covers are made from durable polycarbonate plastic that offers an...

Lumitec Poco Digital Lighting Control 3.0 [101699]

Poco Digital Lighting Control 3.0Poco Digital Lighting Control is a low-cost, easy-to-install, and set up onboard digital lighting control system that offers full dimming and color control over all your Lumitec PLI-enabled lights at the touch of a...

RIGID Industries Adapt XP Light Cover - Amber [300423]

Adapt XP Light Cover - AmberRIGID light covers add style and function to any vehicle.  Protect your investment with an easy to snap on light cover made from durable polycarbonate plastic.  Adapt XP covers are available in clear, amber, or...

RIGID Industries Adapt XE 3 Position Switch [300429]

Adapt XE 3 Position SwitchThis RIGID switch is a custom switch for the Adapt XE Extreme Enduro LED Moto Kit and features 3 settings - on, off, and Adapt mode.  Features:3 Settings - on, off, and Adapt modeDesigned to easily mount to the...

Balmar RGB Receiver Node [K12-1000]

RGB Receiver NodeRGB LED 4 amp Receiver. The Receiver receives the RGB Signal that is sent from the controller, through the standard power wires and converts it back to RGB to change the colors and intensity!This product may not be returned to the...

Balmar RGB Controller - 2-Zone *Switches Not Included - Requires 2-Way Momentary Rocker Switch [K12-1200]

RGB Controller - 2-Zone *Switches Not Included - Requires 2-Way Momentary Rocker SwitchNo, you can convert any existing powered light to RGB without rewiring your vessel! Sends an RGB Signal down the power wires and decodes it at the light source using...

Balmar RGB Controller - 1 Zone *Switch Not Included - Required 2-Way Momentary Switch [K12-1100]

RGB Controller - 1 Zone *Switch Not Included - Required 2-Way Momentary SwitchNo, you can convert any existing powered light to RGB without rewiring your vessel! Sends a RGB Signal down the power wires and decodes it at the light source using our...

Lumitec Pico S-8 Expansion Module [101684]

Pico S-8 Expansion ModulePico Expansion Modules extend the power and reach of the Poco Digital Lighting Control system making it possible to control other manufacturers’ luminaires, lighting accessories and devices that do not have the...

Shadow-Caster 1M Plastic Track f/SCM-AL-LED Strips [SCM-AL-TRACK-1M]

1M Plastic Track for SCM-AL-LED StripsShadow-Caster LED Strip Mounting Track provides mounting options for Shadow-Caster Accent Lighting strips.Features:1M plastic snap-in with 2x mounting screws included1M length2x mounting screws includedCompatible...

Propspeed Lightspeed Foul-Release Underwater Light Coating [LSP15K]

Lightspeed Light Foul-Release Coating More Light. Less Fuss. The long-lasting protective coating for underwater lights.Dedicated to developing products that make the marine craft more efficient and economical to run and maintain. Fouling of running...

Shadow-Caster Single Zone Lighting Control [SCM-SNLC]

Single Zone Lighting ControlSimply toggle power to set color and brightness and to select multiple fade modes.The Shadow-Caster® single-zone lighting controller is a low-cost, marine-grade RGBW LED controller that can be operated from a standard...

Shadow-Caster Multi-Zone Lighting Controller Kit [SCM-ZC-KIT]

Multi-Zone Lighting Controller KitThe Shadow-Caster Zone Controller allows a user the ability to seamlessly control up to 4 zones of lighting independently, or synchronize zones together for a clean, uniform look. Easily switch colors, adjust...

TACO Backing Plate f/GS-850 GS-950 [BP-850AEY]

Backing Plate for GS-850 & GS-950To provide strength for your Grand Slam 850 and 950 when installed to your T-top, our TACO Grand Slam Backing Plates are the answer. Features:Provides strength to baseMatches existing base hole patternNo...

TACO Wedge Plate f/GS-850 GS-950 [WP-850-950]

Wedge Plate for GS-850 & GS-950In case your T-top has a slight curve, keep the appearance of your Grand Slam 850 Electric VHF Antenna Mount and Grand Slam 950 Electric Anchor & Stern Light clean by mounting them perfectly straight with our...

Navisafe Navimount Rail Mount Black w/Screws [957-1]

Navimount Rail Mount Black with ScrewsFeatures:The Navimount RAIL mount is designed to attach the Navilights with Magnetic base, Navimount base or Suction base onto any 25 or 35mm / 1" or 1-1/4" rail.Navilight models 001, 010, 040, 305, 340 require in...